nokia mobile code

nokia mobile code

*#06#=Display the IMEI (Standard GSM command, works on all phones)
*#0000#=Display the firmware version and date



*#92702689#=Here you can view the S/N and the IMEI as well as the life
timer (newer models). The date the phone left the factory and the date
it was purchased. If your phone has been repaired the date of the
repair is also visible. You will need to turn the phone off to exit
this menu. Newer phones simply require you to press ok.

The following codes are specific to older series 40 phones; (Entering
the following codes will restart the phone)



#3370#=Deactivates Enhanced Full Rate




*#67705646#=Clear the operator logo, the logo will be reset to the
default network operator logo.

The following codes work on newer series 40 & series 60/80 phones;

*#2820#=Display the Bluetooth MAC address (Phone must have a built in
bluetooth adapter)
*#7370925538#=Reset the mobile wallet (Phone must have the mobile
wallet feature)
*#7370#=Soft-format the memory (Symbian)
*#7780#=Reset to factory defaults, confirmation required (also known
has a Hard-format), all phone contents will be wiped clean
*#7760#=Display the manufacturing serial number
This only works on the 3310 and 3330;
*#7230#=Deactivate the GPRS PCCCH support
*#746085685#=Display the SIM clock status

The following codes are phone specific or phase related;

*#7220#=Activate the GPRS PCCCH support (Packet Common Control Channel)
*3370#=Activates Enhanced Full Rate, EFT attempts to match wire
quality. The calls are 12.2kbit/s and are not supported by all
operators. It is compatibale with the hightest AMR mode.
#4720#=Deactivates Half Rate
*4720#=Activates Half Rate, Half Rate is 5.6kbit/s and uses half the
bandwidth at the cost of call quality. Network operators often
activate half rate on overloaded towers during peak times to save
costs.